Wuxi Hanyu power equipment co.,ltd
Add to Cart
Lineman Tools NEC-60UNV Multi-functional Battery Crimping Tool for Cable
| Model | NEC-60UNV |
| Crimping force | 60KN |
| Stroke | 42mm |
| Crimping range | 16-300mm2 |
| Cutting range | 40mm Cu/Al cable and armoured cable |
| Punching range | 22.5-61.5 |
| Crimp/charge | 160times |
| Working cycle | 3-16s |
| Voltage | 18V |
| Capacity | 3.0Ah |
| Charging time | 45minutes |
| Package | Plastic case |
| Crimping die | 16.25.35.50.70.95.120.150.185.240.300mm2 |
| Punching & Die | 22.5,28.3,34.6,43.2,49.6,61.5mm |
| Blade | 1set |
| Adapter for crimping | 1pc |
| Adapter for punching | 1pc |
| 3/4" Draw stud/7/16"Draw stud | 1pc |
| Spacer | 1pc |
| Battery | 2pcs |
| Charger | 1pc(AC110-240V,50-60Hz) |
| Sealing ring of cylinder | 1set |
| Sealing ring of safety valve | 1set |
| Battery Crimping Tool | Micro computer control system-automatically detects the pressure when in crimping with double safety protect. The tool is equipped with a double piston pump which characterized with a fast approach towards the connecting material and transfer to high pressure automatically by slow crimping. If a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes. One key control-press the trigger to start working, half loosing the trigger means stop forcing pressure, loosing fully means piston return to the original position. A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal. |
| General features | The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached. A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston & die when the trigger is released. The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion. The crimping head can be smoothly turned by 360° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas. Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of non operation the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries. A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal. |
| ① Head rotates 360° ② OLED Display (Crimp Times, Pressure, Voltage) ③ LED Light ④ Emergency Pressure Release Button ⑤ All tools can be controlled by one trigger ⑥ Ergonomic design for one hand operation. Micro computer control system-automatically detect the pressure ⑦ Li-ion lower power weight ratio with 50% more capacity and shorter charging cycles |  |